Facet International is the world leader in jet fuel handling, industrial coalescer separators, bilge water separator and other separation technology. Advanced filtration and separation products and systems for aviation, marine, petrochemical, water tretment, power genreation and general industrial markets.

 
 | 
 | 
 | 
 | 
 | 
A member of the Purolator Advanced Filtration Group  
 
 

 

    1 AGB Vertical Gas Filter Housing


The Facet 1AGB Series vertical housing permits easy access for inspection or change out of media. The baffle plates at the inlet remove a large amount of solid particulate matter which are collected in the quiescent sump. Use of the impingement baffle permits cartridges to extend their lifetime and function more efficiently in the removal of microscopic solids.

OPERATION
The gas stream enters the filter and through the use of baffling impingement of solid particulate matter occurs, and the velocity of influent gas is reduced before passing trough the cartridges. Some solids drop out and are collected in the sump where they are drained when the drainage is open. Remaining solid particulate matter will be removed when the gas stream flows from outside-inside through the cartridge. Solids remain in the cartridge and gas free of solids flows to the outlet chamber.


• Body: Welded carbon steel construction.
• ASME Code, Section VIII, Div. 1, U stamp and CE marking as option.
• Design pressures up to 100 kg/cm2 — higher pressures available on request.
• Exterior: Prime coated.
• ANSI flanged closure.
• Spirometallic + graphite head gasket — other materials available on request.
• Headlift furnished on 20" (508 mm) OD and larger.
• 4" inlet/outlet cleanout/inspection connections (when permitted by design)
• Connections provided for options listed below


• Inlet and outlet: 150#, 300#, 600#RF (ANSI) flanges.
• All other connections are ANSI flanges.

• Differential pressure gauge.
• Automatic drain valves.
• Liquid level gauge.
• Pressure relief valve.
• Quick opening closure.
   

Top